>>




Home > TOGGLE CLAMPS > Pneumatic swing clamps > No. 6829SP Clamping arm
Order
no. 		Size dia. D1 F H H1 I L M N dia. O dia. W Weight
[g]
92486 12 9 35 5.0 5.0 12 45 M4 4 5.5 8 13
92494 16 9 41 5.0 4.0 12 51 M4 4 5.5 8 15
92502 20 14 48 5.5 7.5 16 64 M6 6 8.5 12 31
93674 25 14 50 6.5 6.0 16 66 M6 6 8.5 14 32
93682 32 14 60 9.0 7.0 19 80 M8 10 8.5 16 55
93690 40 14 70 9.0 7.0 19 90 M8 10 8.5 16 65
93708 50 17 80 10.0 9.0 25 105 M12 10 10.5 20 132
93716 63 17 90 10.0 9.0 25 115 M12 10 10.5 20 149

Note:
Fitting clamping arm:
1) Set up clamping arm with spring washer and screw without play.
2) Turn clamping arm into position.
3) Hold clamping arm fixed with wrench and tighten screw.

Clamping arm removal:
1) Hold clamping arm fixed with wrench and loosen screw.
2) With light blows from below (plastic hammer), separate clamping arm from the piston rod.
Caution! No side blows permitted!