>>




Home > STANDARD CLAMPING ELEMENTS > Pull-down clamps > No. 6497A Stop, fixed
Order
no. 		Slot B1 B2 E G H1 H2. H3 K L1 L2 L3 Weight
[g]
550509 12
14
16
18 		19 65 12 M6 38 40 85 20 132 66.0 66.0 2857
550510 20
22
24
28
30 		26 75 12 M6 45 40 100 20 177 85.5 91.5 4673
550511 32
36
42 		38 90 12 M6 56 40 120 20 211 95.0 116.0 7900

Application:
Stop for workpieces or fixtures that are clamped or fastened to the machine table using a stable clamping jaw. Depending on requirements, the clamping jaw can be rotated so that either a smooth surface or a serrated surface is available.

Note:
Flat sliding block no. 6322A or 6322B enables the stop to be accurately positioned in the machine table groove.